Authenticating with a Personal Access Token

Required roles: system programmer, security administrator

You can use API Mediation Layer to generate, validate, and invalidate a Personal Access Token (PAT) that can enable access to tools such as VCS without having to use credentials of a specific person. The use of PAT does not require storing mainframe credentials as part of the automation configuration on a server during application development on z/OS. Additionally, using a PAT makes it possible to limit access to specific services and users by means of token revocation when using a token.

Gateway APIs are available to both users as well as security administrators. APIs for users can accomplish the following functions:

User APIs

• Generate a token
• Validate a token
• Invalidate a specific token
• Invalidate all tokens

APIs for security administrators are protected by SAF resource checking and can accomplish the following functions:

Security Administrator APIs

• Invalidate all tokens for a user
• Invalidate all tokens for a service
• Evict non-relevant tokens and rules

Notes

• An SMF record can be issued when a Personal Access Token is generated. For more information, see SMF records issued by API ML.
• To enable Personal Access Token support when using the Caching Service, Infinispan is the required storage solution. Infinispan is part of Zowe installation. No additional software or installation is required when using this storage solution.

For detailed information about using the Personal Access Token as part of single sign on, see the section Using the Personal Access Token to authenticate later in this article.

tip

For additional information, see the Medium blog post Personal Access Tokens for the Zowe API Mediation Layer.

User APIs

Generate a token

A user can create the Personal Access Token by calling the following REST API endpoint through the Gateway:

POST /auth/access-token/generate

The full path of the /auth/access-token/generate endpoint appears as:
https://{gatewayUrl}:{gatewayPort}/gateway/api/v1/auth/access-token/generate.

The request requires the body in the following format:

{
    "validity": 90,
    "scopes": ["<serviceId_1>,<serviceId_2>"]
}

• validity
  Specifies the expiration time of the token. The maximum threshold is 90 days.

• scopes
  Specifies the access limits on a service level. This parameter introduces a higher level of security in some aspects. Users are required to provide a scope. If no service is specified, it is not possible to authenticate using the token.

When creation is successful, the response to the request is a body containing the PAT with a status code of 200. When creation fails, the user receives a status code of 401.

Validate a token

The user can validate the Personal Access Token by calling the following REST API endpoint through the Gateway:

POST /auth/access-token/validate

The full path of the /auth/access-token/validate endpoint appears as https://{gatewayUrl}:{gatewayPort}/gateway/api/v1/auth/access-token/validate.

The request requires the body in the following format:

{
    "token": "<token>",
    "serviceId": "<serviceId>"
}

note

The user has the option of calling this API to validate the token, however, validation is also automatically performed by the API ML.

When validation is successful, the response to the request is an empty body with a status code of 204. When validation fails, the user receives a status code of 401.

Invalidate a specific token

The user can invalidate the Personal Access Token by calling the following REST API endpoint through the Gateway:

DELETE /auth/access-token/revoke

The full path of the /auth/access-token/revoke endpoint appears as https://{gatewayUrl}:{gatewayPort}/gateway/api/v1/auth/access-token/revoke.

The request requires the body in the following format:

{
  "token": "<token_value>"
}

When the /auth/access-token/revoke endpoint is called, the provided hash of the PAT is stored in the cache by the Caching Service under the invalidTokens key. As such, the token is invalidated. Access to these entries is protected by the API ML client certificate.

When invalidation is successful, the response to the request is an empty body with a status code of 204. When invalidation fails, the user receives a status code of 401.

Invalidate all tokens

The user can invalidate all Personal Access Tokens by calling the following REST API endpoint through the Gateway:

DELETE /auth/access-token/revoke/tokens

The full path of the /auth/access-token/revoke/tokens endpoint appears as https://{gatewayUrl}:{gatewayPort}/gateway/api/v1/auth/access-token/revoke/tokens.

The body can optionally provide a timestamp as part of the request. Use the following format for the body:

{
   "timestamp": "<timestamp>"
}

If the body is not provided, the timestamp value defaults to the current date.

When the /auth/access-token/revoke/tokens endpoint is called, the provided user rule is stored in the cache by the Caching Service under the invalidUsers key. As such, all of the tokens of the user are invalidated. Access to these entries is protected by the client certificate of the API ML.

When invalidation is successful, the response to the request is an empty body with a status code of 204. When invalidation fails, the user receives a status code of 401.

Security Administrator APIs

Invalidate all tokens for a user

If a security breech is suspected, the security administrator can invalidate all the tokens based on criteria as established by rules. Such criteria define the level of access control and can restrict access in advance. Rule based access restriction can be applied by either user ID or service scopes.

note

Rules are entries used to revoke the tokens either by users or by services. Such rule entries for services appear in the following format:

{
   "serviceId": "<serviceId>",
   "timestamp": "<timestamp>"
}

Rule entries for users appear in the following format:

{
   "userId": "<userId>",
   "timestamp": "<timestamp>"
}

The Security Administrator with specific access to SAF resources can invalidate all tokens bound to a specific user by calling the following REST API endpoint through the Gateway:

DELETE /auth/access-token/revoke/tokens/users

The full path of the /auth/access-token/revoke/tokens/users endpoint appears as https://{gatewayUrl}:{gatewayPort}/gateway/api/v1/auth/access-token/revoke/tokens/users.

The request requires the body in the following format:

{
   "userId": "<userId>",
   "timestamp": "<timestamp>"
}

• userId
  Specifies the user the revocation is applied to.

• timestamp
  Specifies the date of revocation (the default value is the current time) in milliseconds. The timestamp is used to specify that tokens created before the date specified in the timestamp are invalidated. As such, any subsequent tokens created after that date are not affected by the user rule.

By calling this endpoint, the user rule is stored in the cache by the Caching Service under the invalidUsers key.

When invalidation is successful, the response to the request is an empty body with a status code of 204. When invalidation fails, the user receives a status code of 401.

Invalidate all tokens for a service

A security administrator who has specific access to SAF resources can invalidate all tokens bound to a specific service by calling the following REST API endpoint through the Gateway:

DELETE /auth/access-token/revoke/tokens/scope

The full path of the /auth/access-token/revoke/tokens/scope endpoint appears as https://{gatewayUrl}:{gatewayPort}/gateway/api/v1/auth/access-token/revoke/tokens/scope.

The request requires the body in the following format:

{
   "serviceId": "<serviceId>",
   "timestamp": "<timestamp>"
}

Invalidation of all tokens is possible by using rules based on service scopes.

• serviceId
  Specifies the service to which the revocation should be applied (e.g. APPL IDs).

• timestamp
  Specifies the date of revocation (the default value is the current time) in milliseconds. A timestamp is used to state that tokens created before the date specified in the timestamp are invalidated. As such, any subsequent tokens created after that date are not affected by the service rule.

Calling this endpoint stores the service rule in the cache by the Caching Service under the invalidScopes key.

When invalidation is successful, the response to the request is an empty body with a status code of 204. When invalidation fails, the user receives a status code of 401.

Evict non-relevant tokens and rules

The Security Administrator with specific access to SAF resources can evict non-relevant invalidated tokens and rules from the cache by calling the following REST API endpoint through the Gateway:

DELETE /auth/access-token/evict

The full path of the /auth/access-token/evict endpoint appears as https://{gatewayUrl}:{gatewayPort}/gateway/api/v1/auth/access-token/evict.

The /auth/access-token/evict endpoint evicts all invalidated tokens which were expired and all the rules related to the expired tokens.

The main purpose of the eviction API is to ensure that the size of the cache does not grow unbounded. The token verification process requires processing of all rules, including those which may no longer be applicable. As such, verification processing may result in needless associated costs if there are stored rules which are no longer relevant.

When eviction is successful, the response to the request is an empty body with a status code of 204. When eviction fails due to lack of permissions, the administrator receives a status code of 403.

Using the Personal Access Token to authenticate

There are four ways the API client can use the Personal Access Token to authenticate as part of the Single Sign On in which a service is specified in the scopes at the time when the token is issued:

• Using the Authorization: Bearer request header.

  Example:

  GET /<allowed-service>/api/v1/request HTTP/1.1
  Authorization: Bearer eyJhbGciOiJSUzI1NiJ9...
  
  HTTP/1.1 200
  ...

• Using a Secure HttpOnly cookie with the name apimlAuthenticationToken.

  Example:

  GET /<allowed-service>/api/v1/request HTTP/1.1
  Cookie: apimlAuthenticationToken=eyJhbGciOiJSUzI1NiJ9...
  
  HTTP/1.1 200
  ...

• Using a Secure HttpOnly cookie with the name personalAccessToken.

  Example:

  GET /<allowed-service>/api/v1/request HTTP/1.1
  Cookie: personalAccessToken=eyJhbGciOiJSUzI1NiJ9...
  
  HTTP/1.1 200
  ...

• Using a request header with the name PRIVATE-TOKEN.

  Example:

  GET /<allowed-service>/api/v1/request HTTP/1.1
  PRIVATE-TOKEN: eyJhbGciOiJSUzI1NiJ9...
  
  HTTP/1.1 200
  ...

In these examples, the API client is authenticated.

If the API client tries to authenticate with a service that is not defined in the token scopes, the X-Zowe-Auth-Failure error header is set and passed to the southbound service. The error message contains a message that the provided authentication is not valid.